LaMotte SMART Spectro Spectrophotometer - Manual (Page 37)

SMART Spectro Operator’s Manual 2.11 37
 NAMING THE TEST
A NAME can be up to 14 characters long. The menu choices for each character
are 26 letters A to Z, ten numerals 0 to 9, a space, a dash, a decimal point, and
a ! as a terminator. Selecting the terminator indicates the end of the name and
stores the name. The terminator, !, is the fi rst menu choice since it is the one
character that will always have to be selected. It is before the letter A. DO NOT
CHOOSE THE ! UNTIL THE NAMING OF THE TEST HAS BEEN COMPLETED.
The terminator should be selected following the end of the name. It must be the
last character selected.
1. The user test to be edited has
been selected.
102 User Test 2
* NAME THE TEST
SELECT WL
NEW CALIBRATION
FORMAT RESULT
2. Press *ENTER to select NAME
THE TEST. Press to scroll to
CHANGE. (Select KEEP to go
back to the User Test menu.)
NAME THE TEST
* KEEP
CHANGE
END OF LIST
3. Press *ENTER to select
CHANGE.
NAME THE TEST
102
!
ABCDEFGHIJKLMNOPQRS
TUVWXYZ0123456789-.