LaMotte SMART Spectro Spectrophotometer - Manual (Page 51)

SMART Spectro Operator’s Manual 2.11 51
4. Press or to select the
desired test mode.
TEST MODE
* REGULAR
REVERSE
END OF LIST
5. Press *ENTER to select the test
mode and return to the MAIN
MENU.
MAIN MENU 12:00:01
* CALIBRATE WL
PROGRAMMED TESTS
%T/ABS
PC LINK
BATTERY OPERATION
The SMART Spectro can be run using battery power. The battery pack
consists of a rechargeable Ni-metal hydride battery pack. The battery pack
is not included in the standard meter package and must be purchased as an
accessory (Code 2000-BP). The battery charger/adapter used with the optional
battery pack comes standard with each SMART Spectro.
 CHARGING THE BATTERY PACK
1. Connect the Power Supply to the Battery Charger.
2. Connect the Battery Charger to the Battery Pack.
3. The battery pack will automatically charge. (For older battery packs with a
switch, move the switch to the CHARGING position.) A full charge will require
about 5 hours.
 RUNNING THE SMART SPECTRO USING BATTERIES
Connect the Battery Pack to the SMART Spectro.
CAUTION: Do not connect the Power Supply directly to the Battery Pack. The
connectors will not fi t. Don’t force them.