Metrohm 751 GPD Titrino - Manual (Page 9)

2.3. Text input
751 GPD Titrino
6
2.3 Text input
Example storing a method:
• Press key .
Place the cursor to ">store method" and press
.
The name of the method which is currently in the
working memory is displayed.
• Delete this name with .
• Open the "text writing mode" with key .
You can now select the desired character by means
of the cursor keys, then confirm this character. Se-
lect the next character...
When you confirmed the last character, i.e. your
name is complete, you quit the text writing mode
with .
Confirm now the name with .
• During text input you can correct typing errors with
:
deletes the characters one by one.
• If you wish to modify an existing name (e.g. if you
have names like Text 1, Text 2, Text 3), do not de-
lete the existing name before you start the text input
mode. Proceed then as follows:
1. Press , place the cursor to
">store method" and press .
2. Open the text writing mode directly: Press key
.
3. now deletes the characters one by
one or you can add additional characters.
4. If your text is complete, leave the text writing
mode with and confirm the text with
.
REPORTS
ABC
.
user methods
>store method:
method name:
A BCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
µ°!"#$&'()*+,-./ 0123456789
user methods
>store method
method name: Text
user methods
>store method
method name: ********