Metrohm 751 GPD Titrino - Manual (Page 140)

3.2 Remote control commands
751 GPD Titrino
137
"Info", continuation
³ Ã .EP Endpoint
³ ³ Ã .1 1 st result
³ ³ ³ Ã .V Value read only ditto
³ ³ ³ Ã .Meas Measured value read only
³ ³ ³ Ã .Mark Mark if more than 1 EP per window read only
³ ³ Ã up to 9 EP's
³ Ã .Var Variables C4X
³ ³ Ã .C40 Start measured value read only/read+write ditto
³ ³ Ã .C41 Titration end volume read only/read+write
³ ³ Ã .C42 Titration time read only/read+write
³ ³ Ã .C43 Volume drift in SET/KFT read only/read+write
³ ³ Ã .C44 Titration temperature read only/read+write
³ ³ Ã .C45 Start volume read only/read+write
³ ³ Ã .C46 Asymmetry pH read only
³ ³ Ã .C47 Slope of electrode read only
³ ³ Ã .C48 Volume at maximum voltage read only/read+write
³ ³ Ã .C49 Volume at minimum voltage read only/read+write
³ ³ Ã .DTime Time for drift corr.or dosing time read only/read+write
³ Ã .FixEP Fix EP or fix volume
³ ³ Ã .51 C51
³ ³ ³ Ã .Value Value read only 3.2.2.136.
³ ³ ³ up to 59
³ Ã .pK pK/HNP or fix times
³ ³ Ã .61 C61
³ ³ ³ Ã .Value Value read only ditto
³ ³ ³ up to 69
³ Ã .TempVar Temporary variables C7X
³ ³ Ã .C70 up to C79 read only/read+write ditto
³ Ã .TimeWin Rates in time windows
³ ³ Ã .81 C81
³ ³ ³ Ã .Mean Rate read only 3.2.2.137.
³ ³ ³ Ã .Dev Standard deviation of the rate read only ditto
³ ³ ³ up to 89
³ Ã .MeanRateC80 Mean rate C80
³ ³ Ã .Mean Rate read only ditto
³ ³ Ã .Dev Standard deviation of the rate read only ditto
³
à .StatisticsVal Statistics values
³ Ã .ActN Number of results in chart read only 3.2.2.138.
³ Ã .1 1 st mean
³ ³ Ã .Mean Mean read only ditto
³ ³ Ã .Std Absolute standard deviation read only ditto
³ ³ Ã .RelStd Relative standard deviation read only ditto
³ Ã up to 9 mean values
³
à .SiloCalc Values of silo calculations
³ Ã .C24 Values of variable C24
³ ³ Ã .Name Name read only 3.2.2.139.
³ ³ Ã .Value Value read only ditto
³ ³ Ã .Unit Unit read only ditto
³ Ã .C25 as for C24
³ Ã .C26 Values of variable C26
³ ³ Ã .ActN Number of single values read only ditto
³ ³ Ã .Mean Mean value read only ditto
³ ³ Ã .Std Absolute standard deviation read only ditto
³ ³ Ã .RelStd Relative standard deviation read only ditto
³ Ã .C27 as for C26