Metrohm 751 GPD Titrino - Manual (Page 165)

3.2. Remote control commands
751 GPD Titrino
162
CConfig.P .PeriphUnit.Rem .RemoteBox.K .Keyboard US US, deutsch, francais,
español, schweiz.
CConfig.P .PeriphUnit.Rem .RemoteBox.B .Barcode input input, method, id1, id2,
id3, smpl size
Connections via Remote Box.
.Status:
Select if a Remote Box is connected.
.Keyboard: Type of keyboard which is connected to the Remote Box.
.Barcode: Select target in Titrino where you wish to have the string from the
barcode reader. "input" means that the string comes into the field
where the cursor is currently placed.
3.2.2. 3.2.2.100. 100. CConfig.A .Aux.L .Language english english, deutsch, francais, espanol,
italiano, portugese, svenska
Selection of the dialog language.
3.2.2. 3.2.2.101. 101. CConfig.A .Aux.S .Set $G
CConfig.A .Aux.S .Set.D .Date YYYY-MM-DD
CConfig.A .Aux.S .Set.T .Time HH:MM
Date and time.
Input format of the date: Year-month-day, two-digit, enter leading zeros.
Input format for the time: Hours:minutes, two-digit, enter leading zeros. Date
and time have to be set with &Config.Aux.Set $G just after entry of the value.
3.2.2. 3.2.2.102. 102. CConfig.A .Aux.R .RunNo 00...9999
Current sample number.
Set to 0 on power on and initialization. After 9999, counting starts again at 0.
3.2.2. 3.2.2.103. 103. CConfig.A .Aux.A .AutoStart 1...9999, OFF OFF
Number of automatic, internal starts.
3.2.2. 3.2.2.104. 104. CConfig.A .Aux.St .StartDelay 00...999 999
Start delay time in s. During this time, the data of the preceding determination
are retained.
3.2.2. 3.2.2.105. 105. CConfig.A .Aux.Re .ResDisplay bold bold, standard
Character set for the result display at the end of the determination.
3.2.2. 3.2.2.106. 106. CConfig.A .Aux.D .DevName up to 8 ASCII characters
Name of the instrument for connections with several units. It is advisable to use
only the letters A...Z (ASCII No. 65...90), a...z (ASCII No. 97...122) and the
numbers 0...9 (ASCII No. 48...57) when the function Setup.AutoInfo
(3.2.2.169) is used at the same time.
If a name has been entered, it will be printed out in the result report (full, short).