Metrohm 751 GPD Titrino - Manual (Page 216)

5.1 Setting up and connecting the instruments
751 GPD Titrino
213
5.1.7.2 Connecting a PC keyboard
PC keyboards with a 5-pole DIN plug can be connected to 6.2148.000 Remote Box. For
keyboards with a PS/2 plug an adapter PS/2
→ DIN is available in PC shops.
Settings at the Titrino:
Under key , >peripheral units, "Remote Box: on"
Keyboard:
Select the country-specific keyboard layout of your PC keyboard.
If the Titrino does not support your keyboard you should select a keyboard which has the
closest possible layout (for example check the 2nd occupancy of the numerical keys).
Country-specific special characters will probably not be converted correctly.
Operating via a PC keyboard:
The Titrino can be operated from the PC keyboard. The Titrino functions are called up as
follows:
Titrino function Key combination
on PC keyboard Remarks
Alt F
Alt C
Alt M
F5
F10
Cursor ↑ ↓ Cursor ↑ ↓ Navigation
Cursor → ← Cursor → ← Selection of inputs
Alt D
DEF: formula input, common
variable, mean value:
EP
RS
MN
C
E
R
M
C
Input of corresponding quantity or
variable together with the numeri-
cal address, e.g. R1 gives RS1.
enter
F9
F2
F11
Alt E
Alt P Report selection with → ←
ESC
Alt O Printout reports:
Alt P + Alt O
F4 on/off
F12
F7
F6 on/off
F8
F3
Alt U