Metrohm viva 1.1 - Manual (Page 644)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
632 ￭￭￭￭￭￭￭￭
viva 1.1
Identification Description
AREA.MNVD
ELTA Difference between the mean value of the peak
areas of all replications for measurement {x} and the
mean value of the peak areas of all replications for
measurement {x-1}
HGT.MNV Mean value of the peak heights of all replications
HGT.ASD Absolute standard deviation of the peak heights of
all replications
HGT.RSD Relative standard deviation of the peak heights of all
replications
HGT.MNVDE
LTA Difference between the mean value of the peak
heights of all replications for measurement {x} and
the mean value of the peak heights of all replications
for measurement {x-1}
Result variables per variation
Designation 'RS.'Command name'.VAR{x}.Variable identification'
Identification Description
VTOT Total volume in the measuring vessel for variation {x}
5.5.2.11.3.2 CPVS - General/Hardware
Tab: Method ▶ CPVS ▶ Properties... ▶ General/Hardware
Command name
Name of the command.
Entry 25 characters
Device
Device name
Selection of a device from those available in the device table. Only devices
with which the command can be executed are available.
Selection 'Device name' | not defined
Default value not defined
not defined
In this case, the device name must be assigned by the user at the start
of the method.