Metrohm viva 1.1 - Manual (Page 458)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
446 ￭￭￭￭￭￭￭￭
viva 1.1
Selection 089 Photometer
Default value 089 Photometer
Heater
Target temperature
Temperature to which the cuvette has to be heated.
Input range 20 - 80 °C
Selection Init. temp. | off
Default value Init. temp.
Init. temp.
With Init. temp., the cuvette heater is activated at the same time as
the instrument and the cuvette is heated up to this temperature. The
initial temperature is entered and edited in the instrument configura-
tion (see Chapter 7.7.3, page 891).
off
Switch off heater.
5.5.2.3.9 RLS DEV
5.5.2.3.9.1 RLS DEV - Overview
Dialog window: Method ▶ RLS DEV ▶ Properties... ▶ RLS DEV - 'Command name'
Command to release an instrument for using it in other parallel running
methods. It removes the reservation made by the current method.
Instruments
This command can be executed with the following instruments:
Sample changer: 814, 815, 858, 919
Appearance
The command has the following appearance:
Parameters
The parameters for the RLS DEV command are configured in the follow-
ing dialog window:
￭ RLS DEV - Properties