Metrohm viva 1.1 - Manual (Page 1046)

9.1 How to proceed?
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1034 ￭￭￭￭￭￭￭￭
viva 1.1
9.1.7.4 Editing a working sample table
How to proceed?
1 Select the Workplace program part.
2 Click on the Determination series tab in the Run subwindow.
3 If desired, load the existing sample table into the working sample
table.
4 If desired, click on the [Sample table] ▶ Properties... menu item in
the Run subwindow.
The Properties - Determination series dialog window opens.
5 Define the properties for the determination series.
6 Click on [OK].
The Properties - Determination series dialog window closes.
7 Select the line to be modified in the Run subwindow.
8 Click on the [Edit] ▶ Edit line menu item.
The Edit line 'Name' dialog window opens.
9 Select the desired method in the Method selection list and enter the
sample data.
10 Click on [Apply].
The sample data entered is applied to the respective line in the work-
ing sample table.
11 Repeat step 8 for each required determination.
12 Click on [Close].
The Edit line 'Name' dialog window closes.
13 If desired, click on the [Sample table] ▶ Save as... menu item in
the Run subwindow.
The Save sample table dialog window opens.