Bird Technologies SH-36S-RM-Manual - Manual (Page 94)

Bird Technologies
78
Figure 57 Example, Limits 1 Tab
Limits 2 Tab
Note:
The options displayed on this tab will change
slightly depending on the type of graph opened.
Note:
The upper limit fails any datapoints that are above
the line.
Note:
The lower limit fails any datapoints that are below
the line.
Note:
Up to thirty points, for both upper and lower limit
lines can be set up. Using multiple points, a bracketed area
may be created.
1. Click on a segment
2. Drag each segment at its set point to move it up or down.
Note:
If a limit line point is disabled, it is removed from
the list in the Options dialog box.
Figure 58 Example, Limits 2 Tab
Figure 59 Multiple limit line points used to create a bracketed area
-120
-110
-100
-90
-80
-70
95.0 95.2 95.4 95.6 95.8
LIMIT TEST FAILED
Po
we
r (d
Bm
)
Frequency (MHz)
Limit Line