Connecting a remote computer to the host computer – Bird Technologies SH-36S-RM-Manual User Manual
Page 36

Bird Technologies
20
Connecting a Remote Computer to the Host Computer
To connect your home computer, which is the client (or remote) com-
puter to the Rack Mount, follow these steps:
1. On your home computer, click Start, point to All Programs, and
then point to Accessories.
2. In the Accessories menu, point to Communications, and then click
Remote Desktop Connection.
3. In the Computer box, type the computer name of your host computer.
Note:
The default computer name of the Rack Mount is
'SH-36S-RM' and the default IP address and Subnet mask is
192.168.1.10 and 255.255.255.0
4. Click Connect.
5. When the Log On to Windows dialog box appears, type your user
name, password, and domain (if required), and then click OK.
6. The Remote Desktop window opens, and you see the desktop set-
tings, files, and programs that are on your host computer, which in
this example is the Rack Mount. Your host computer remains
locked, and nobody can access it without a password. In addition, no
one will be able to see the work you are doing remotely.
To end your Remote Desktop session:
1. Click Start, and then click Log Off at the bottom of the Start menu.
2. When prompted, click Log Off.