Bird Technologies SH-36S-RM-Manual - Manual (Page 24)

Bird Technologies
8
7. In the Start menu, select the desired measurement.
z "Spectrum Analysis Measurement" on page 52.
z "Occupied Bandwidth Measurement" on page 53.
z "Channel Power Measurement" on page 55.
z "Adjacent Channel Power Measurement" on page 57.
z "Time Domain (Zero Span)" on page 59
z "Field Strength Measurement" on page 60.
z "Demodulate Signal" on page 62
z "Carrier-to-Interference Ratio" on page 63.
z "Out-of-Band and In-Band, Out-of-Channel Spurious" on page 65.
z "Water Fall Spectrogram" on page 43.
8. Turn on markers or limit lines if needed (see “Marker On / Off” on
page 44 and "Limit Lines" on page 46).
9. Make a sweep.
10. In the File & Help Menu, click on Quick Save Trace to save the
data (see “File & Help Menu” on page 48).