Chapter 5 measurements – Bird Technologies SH-36S-RM-Manual User Manual
Page 67

51
Chapter 5
Measurements
Spectrum Analysis, measuring the power at each frequency in the
sweep range, is the basic measurement. The other measurements
interpret that data to provide useful results.
In the Spectrum Analyzer mode, the following measurements can be used:
z
"Spectrum Analysis Measurement" on page 52.
z
"Occupied Bandwidth Measurement" on page 53.
z
"Channel Power Measurement" on page 55.
z
"Adjacent Channel Power Measurement" on page 57.
z
"Time Domain (Zero Span)" on page 59
z
"Field Strength Measurement" on page 60.
z
"Carrier-to-Interference Ratio" on page 63.
z
"Out-of-Band and In-Band, Out-of-Channel Spurious" on page 65.
z
This manual is related to the following products: