Bird Technologies SH-36S-RM-Manual - Manual (Page 100)

Bird Technologies
84
Updating the Firmware on a Remote Rack Mount SignalHawk
1. Go to http://birdtechnologies.thomasnet.com/item/all-categories-test-
equipment/-categories-test-equipment-sh-36-signalhawk-series/sh-
36s-rm.
2. Download the Rack Mount SignalHawk software upgrade to a
local PC.
3. Connect the remote computer to the host computer. See “Connect-
ing a Remote Computer to the Host Computer” on page 20.
4. Click on “Options-Local Resources” at the start of the Remote
Desktop Connection window.
Figure 65 Remote Desktop Connection Window
5. Select “Disk drives”.
Note:
This will enable access of the local drives to the
remote Rack Mount SignalHawk.
Figure 66 Options-Local Resources
6. Click on the “Connect”.
7. Click “OK” to access the local drives from the remote computer.