Bird Technologies SH-36S-RM-Manual - Manual (Page 39)

23
Chapter 4 Settings
In order to obtain the most accurate information possible, it is very
important to use the proper settings. The SignalHawk can be configured
in various ways, allowing for a wide range of measurement capabilities.
Getting Started with the SignalHawk
Press the Power button to turn on the unit.
Setting Up
See “PC SignalHawk Set-Up” on page 9. Use this chapter to adjust the
Settings.
Start Menu, Menu Keys
Menu keys are the six rectangular yellow keys located below the display
screen. Click a menu key to move the highlight selection bar to the
desired menu list. When using a menu list, use the mouse scroll wheel
or the up- and down-arrow keys to move the highlight bar through the
list. Use the left- and right-arrow keys to move to a different list box.
Spec Analysis Menu Key
Click here to enter the Spectrum Analyzer mode.
Utilities Menu Key
Click here to display the Utility Menu main screen. The Utilities
menu provides information about the instrument software, amount of
available memory, battery charge status, system date and time, and
how to contact Bird Technologies Group.
Help Menu Key
Displays the Help options but does not exit the current screen. Click on the
Back... selection to display the default selections for the current menu.
CAUTION
Spectrum Analyzer has a +20 dBm (100 mW) max. RF input.
Exceeding the maximum input will damage the SignalHawk. If
unsure of power levels, measure the test connection with a power
sensor before using the SignalHawk.