AJA FS1-X Manual - Manual (Page 84)

FS1-X v1.1 www.aja.com 84
3.1-3.8 SDI 1 Channel
Pair Delay
When Channel Pair is selected above, eight individual SDI 1 audio channel pair menus
become available, permitting adjusting the delay of each input channel pair.
• Delay adjustment range is -128 to +12288 in units of samples where 48 samples = 1
millisecond. The Front Panel displays the delay in milliseconds and as fractions of
milliseconds in units of samples.
4.0/5.0/6.0 SDI 2
Level, Phase, Delay
See descriptions for SDI 1:
• “1.0 SDI1 Level” on page 82
• “2.0 SDI1 Phase” on page 83
• “3.0 SDI1 Delay” on page 83
7.0/8.0/9.0 Fiber1
Level, Phase, Delay
See descriptions for SDI 1:
• “1.0 SDI1 Level” on page 82
• “2.0 SDI1 Phase” on page 83
• “3.0 SDI1 Delay” on page 83
10.0/11.0/12.0
Fiber2 Level, Phase,
Delay
See descriptions for SDI 1:
• “1.0 SDI1 Level” on page 82
• “2.0 SDI1 Phase” on page 83
• “3.0 SDI1 Delay” on page 83
13.0/14.0/15.0 AES
Level, Phase, Delay
See descriptions for SDI 1:
• “1.0 SDI1 Level” on page 82
• “2.0 SDI1 Phase” on page 83
• “3.0 SDI1 Delay” on page 83
16.0/17.0/18.0
MADI BNC Level,
Phase, Delay
Same controls as SDI, except can be applied to 64 individual audio inputs, or 32 channel
pairs. See descriptions for SDI 1:
• “1.0 SDI1 Level” on page 82
• “2.0 SDI1 Phase” on page 83
• “3.0 SDI1 Delay” on page 83
19.0/20.0/21.0
MADI Fiber Level,
Phase, Delay
Same controls as SDI, except can be applied to 64 individual audio inputs, or 32 channel
pairs. See descriptions for SDI 1:
• “1.0 SDI1 Level” on page 82
• “2.0 SDI1 Phase” on page 83
• “3.0 SDI1 Delay” on page 83