Rockwell Automation 1440-VDRP06-00RH XM-160/161/162 Direct Vibration Module - Manual (Page 82)

Publication GMSI10-UM025C-EN-P - August 2010
74 Configuration Parameters
Data Parameters The Data parameters are used to view the measured values of the input
channels and to monitor the status of the channels, alarms, and relays.
Channel Data Parameters
TIP
To view all the data parameters in the XM Serial
Configuration Utility, click the View Data tab.
Channel Data Parameters
Parameter Name Description Values/Comments
Status States whether a fault exists on the associated
channel. If a fault exists, the overall value may not
be accurate. Possible status values: No Fault
Fault
Shows the measured overall value for the channel.
Shows the measured average DC offset of the
transducer signal. This value is compared with Fault
High and Fault Low to determine whether the
transducer is working properly.
XM Configuration
Utility EDS File
Value Overall
Measured
Value
XM Configuration
Utility EDS File
DC Bias Measured
DC Bias