Rockwell Automation 1440-VDRP06-00RH XM-160/161/162 Direct Vibration Module - Manual (Page 65)

57 Publication GMSI10-UM025C-EN-P - August 2010
Chapter
3
Configuration Parameters
This chapter provides a complete listing and description of the XM-160,
XM161, and XM-162 parameters. The parameters can be viewed and edited
using the XM Serial Configuration Utility software and a personal computer. If
the module is installed on a DeviceNet network, configuring can also be
performed using a network configuration tool such as RSNetWorx (Version
3.0 or later). Refer to your configuration tool documentation for instructions
on configuring a device.
For information about See page
IEPE Buffer Power and Signal Detection Parameters 58
Channel Transducer Parameters 60
Channel Signal Processing Parameters 62
Channel Overall Measurement Parameter 63
Alarm Parameters 64
Relay Parameters 66
4-20mA Output Parameters (XM-161) 70
Triggered Trend 71
I/O Data Parameters 73
Data Parameters 74
Device Mode Parameters 76
IMPORTANT
The
The appearance and procedure to configure the parameters
may differ in different software.