Rockwell Automation 1440-VDRP06-00RH XM-160/161/162 Direct Vibration Module - Manual (Page 121)

Publication GMSI10-UM025C-EN-P - August 2010
DeviceNet Objects 113
Services
1 Attributes can only be set while the device is in Program mode. See the description of the Device Mode Object
for more information.
Channel Object
(Class ID 31F
H
)
The Channel Object models "front-end" processing performed on an input
signal before specific measurements are performed. This processing typically
includes gain, filtering, and/or integration.
Class Attributes
The Channel Object provides no class attributes.
Instances
There are 6 instances of this object for the Direct Vibration modules.
13 Get/Set Threshold (Setpoint
Multiplier) REAL Indicates how the
thresholds should be
adjusted when the
setpoint multiplication
function is invoked. 0 = Disable alarm
> 0 = Multiply the thresholds by
the value
14 Get/Set Startup Period UINT The amount of time that
the Threshold (Setpoint)
Multiplier is applied after
the startup signal is
received. Seconds
18 Get/Set Name STRING2 A name to help identify
this alarm.
Table C.26 Alarm Object Instance Attributes
Attr ID
Access
Rule
Name Data Type Description Semantics
Table C.27 Alarm Object Services
Service
Code
Class/Instance Usage Name Description
0E
h
Instance Get_Attribute_Single Returns a single attribute.
10
h
Instance Set_Attribute_Single
Sets a single attribute.
1