Rockwell Automation 2080-LC10-12DWD Micro810 Programmable Controllers User Manual - Manual (Page 87)

Rockwell Automation Publication 2080-UM001D-EN-E - September 2012 79
Quickstarts Appendix C
7. Press the push button connected to I03. If the value of RTC is in the range
of Year-Time setting for CHANNEL A, then the pilot light turns on.
Configure TOW
1. Power up the Micro810 controller.
The Micro810 splash screen briefly appears after power up.
2. The I/O status display shows PROG mode, the day and time, and the I/O
status. Press the ESC and OK buttons at the same time to navigate to the
Main Menu.
3. Press the DOWN arrow button once to select SR Function. Press the OK
button. The function block for controlling Output 0 shows up.
TOW – Sample Parameter Configuration
Parameter Field Configuration Value
Q Q02
Channel A
EN I03
D/W 0
On MO-08:30
Off MO-08:31