Rockwell Automation 2080-LC10-12DWD Micro810 Programmable Controllers User Manual - Manual (Page 21)

Rockwell Automation Publication 2080-UM001D-EN-E - September 2012 13
About Your Controller Chapter 2
Schematic (Using IEC Symbols)
Disconnect
Isolation
transformer
Emergency-stop
push button
Fuse MCR
230V AC
I/O
circuits
Operation of either of these contacts will
remove power from the external I/O
circuits, stopping machine motion.
Fuse Overtravel
limit switch
MCR
MCR
MCR
Stop Start
Line terminals: Connect to terminals of power
supply
115V AC or
230V AC
I/O circuits
L1 L2
230V AC
Master Control Relay (MCR)
Cat. No. 700-PK400A1
Suppressor
Cat. No. 700-N24
MCR
Suppr.
24V DC
I/O
circuits
(Lo) (Hi)
DC power supply.
Use IEC 950/EN 60950
X1 X2
115V AC
or 230V AC
Line terminals: Connect to 24V DC terminals of
power supply
_
+
44564