Rockwell Automation 2080-LC10-12DWD Micro810 Programmable Controllers User Manual - Manual (Page 3)

Rockwell Automation Publication 2080-UM001D-EN-E - September 2012 iii
Preface
Read this preface to familiarize yourself with the rest of the manual. It provides
information concerning:
• who should use this manual
• the purpose of this manual
• related documentation
Who Should Use this
Manual Use this manual if you are responsible for designing, installing, programming, or
troubleshooting control systems that use Micro800™controllers.
You should have a basic understanding of electrical circuitry and familiarity with
relay logic. If you do not, obtain the proper training before using this product.
Purpose of this Manual This manual is a reference guide for Micro800 controllers, plug-in modules and
accessories. It describes the procedures you use to install, wire, and troubleshoot
your controller. This manual:
• explains how to install and wire your controllers
• gives you an overview of the Micro800 controller system
Refer to the Online Help provided with Connected Components Workbench™
software for more information on programming your Micro800 controller.
Additional Resources These documents contain additional information concerning related Rockwell
Automation products.
Resource Description
Micro800 Programmable Controller External AC
Power Supply Installation
2080-IN001
Information on mounting and wiring the optional
external power supply.
Micro810 USB Adapter Plug-in Module Wirng
Diagrams
2080-WD001
Information on mounting and wiring the
Micro810 USB Adapter Plug-in Module.
Micro800 1.5" LCD Display and Keypad Module
Wirng Diagrams
2080-WD009
Information on mounting and wiring the
Micro800 1.5" LCD Display and Keypad Module.
Industrial Automation Wiring and Grounding
Guidelines, publication
1770-4.1
Provides general guidelines for installing a
Rockwell Automation industrial system.
Product Certifications website, http://
www.rockwellautomation.com/products/
certification/
Provides declarations of conformity, certificates,
and other certification details.
Application Considerations for Solid-State
Controls
SGI-1.1
A description of important differences between
solid-state programmable controller products
and hard-wired electromechanical devices.
National Electrical Code - Published by the
National Fire Protection Association of Boston,
MA. An article on wire sizes and types for grounding
electrical equipment.
Allen-Bradley Industrial Automation Glossary
AG-7.1
A glossary of industrial automation terms and
abbreviations.