Rockwell Automation 2080-LC10-12DWD Micro810 Programmable Controllers User Manual - Manual (Page 80)

72 Rockwell Automation Publication 2080-UM001D-EN-E - September 2012
Appendix C Quickstarts
a. Press and release the count push button. The current value CV
increments to 00002.
b. Press and release the count push button. The current value CV
increments to 00003. Since the current value CV = present value PV,
the output O1 is energized, and the pilot light turns on.
c. Press and release the Reset push button. The current value CV is reset
to zero, and output O1 is de-energized. The pilot light turns off.