Rockwell Automation 1557 MEDIUM VOLTAGE AC DRIVE - Manual (Page 114)

6-58 PARAMETER AND VARIABLE DESCRIPTIONS
1557-UM050F-EN-P – June 2013
4
Skip Speed Parameters
Name Minimum Maximum Default Units Cat.
49 Skip Speed 1 6.0 90.0 90.0 Hz
50 Skip Speed 2 6.0 90.0 90.0 Hz
51 Skip Speed 3 6.0 90.0 90.0 Hz
52 Skip Speed 4 6.0 90.0 90.0 Hz
53 Skip Speed Band 1 0.0 2.0 0.0 Hz
54 Skip Speed Band 2 0.0 2.0 0.0 Hz
55 Skip Speed Band 3 0.0 2.0 0.0 Hz
56 Skip Speed Band 4 0.0 2.0 0.0 Hz
5
Speed Ramp Parameters
Name Minimum Maximum Default Units Cat.
65 Acceleration Time 1 0 999 5 sec 2
66 Acceleration Time 2 0 999 3 sec 2
67 Acceleration Time 3 0 999 14 sec 2
68 Acceleration Time 4 0 999 3 sec 2
69 Deceleration Time 1 0 999 3 sec 2
70 Deceleration Time 2 0 999 3 sec 2
71 Deceleration Time 3 0 999 14 sec 2
72 Deceleration Time 4 0 999 3 sec 2
73 Ramp Speed 1 5.0 6.0 5.0 Hz 2
74 Ramp Speed 2 5.0 100.0 12.0 Hz 2
75 Ramp Speed 3 5.0 100.0 54.0 Hz 2
76 Ramp Speed 4 5.0 100.0 60.0 Hz 2
77 Coast Speed 2 100 2 Hz 2
78 Ramp Start delay 1 10 3 sec 2
80 Ramp test step 0.0 30.0 0.0 Hz
6
Speed Control Parameters
Name Minimum Maximum Default Units Cat.
81 Spd Regulator Bandwidth 0.5 5.0 1.0 r/s 2
82 Total Inertia 0.10 100.0 1.00 sec 3
83 Torque Rate Limit 0.00 60.00 10.00
84 Torque Limit Motoring 0.00 1.50 1.00
85 Torque Limit Braking 0.00 1.50 0.80
86 Torque Command 0 0.00 1.50 0.15 3
87 Torque Command 1 0.00 1.50 0.15 3
88 Speed Reference Step 0.0 2.0 0.0 Hz
89 Speed Feedback Mode 0 1 0 2
90 Torque Control Mode 0 5 1 2
91 Torque Command External -1.500 1.500 0.000
92 Torque Command Minimum 0.00 1.50 1.50
93 Speed Error Deadband 0.0 5.0 0.0 Hz
110 Speed Feedback Filter 0 50 0 r/s 2
111 Torque Rate Limit 0 0.00 60.00 1.00