Rockwell Automation 1557 MEDIUM VOLTAGE AC DRIVE - Manual (Page 111)

PARAMETER AND VARIABLE DESCRIPTIONS 6-55
1557-UM050F-EN-P – June 2013
Local Owner [Local owner]
Linear number:
386
Minimum value: 00 Hex
Maximum value: FF Hex
Analog Output Scaling: N/A
This variable indicates which adapter has exclusive local control of the drive.
Start Owner [Start owner]
Linear number:
387
Minimum value: 00 Hex
Maximum value: FF Hex
Analog Output Scaling: N/A
This variable indicates which adapters are issuing a start command.
Direction Owner [Direction owner]
Linear number:
388
Minimum value: 00 Hex
Maximum value: FF Hex
Analog Output Scaling: N/A
This variable indicates which adapters are issuing a direct command.
Jog Owner [Jog owner]
Linear number:
389
Minimum value: 00 Hex
Maximum value: FF Hex
Analog Output Scaling: N/A
This variable indicates which adapters are issuing a jog command.
Fault Reset Owner [Fault reset owner]
Linear number:
391
Minimum value: 00 Hex
Maximum value: FF Hex
Analog Output Scaling: N/A
This variable indicates which adapters are issuing a fault reset command.
Speed Command Owner [Speed command owner]
Linear number:
392
Minimum value: 00 Hex
Maximum value: FF Hex
Analog Output Scaling: N/A
This variable indicates which adapter is selecting the drive speed command.
Synchronous Transfer Owner [Synchronous transfer owner]
Linear number:
393
Minimum value: 00 Hex
Maximum value: FF Hex
Analog Output Scaling: N/A
This variable indicates which adapter is issuing a synchronous transfer command.
SCANport Input [SCANport input]
Linear number:
398
Minimum value: 0
Maximum value: 32767
Analog Output Scaling: 1.0 V = 3276.7
This variable is the SCANport speed command input before scaling.
Prior to Rev 4.60/5.00 this variable was located in the Analog I/O group with a linear number of 365.