Rockwell Automation 1336-GM6 Enhanced DeviceNet Communications Module - Manual (Page 87)

Appendix
A
Specifications
Appendix Objectives Appendix A provides the specifications that you may need to install
or use either the 1203-GU6 module or the 1336-GM6 board. These
adapters are non-repairable units. If they are broken, you must replace
them.
1203-GU6 Specifications The following table gives the specifications for the 1203-GU6
Enhanced DeviceNet communications module.
Category Specifications
Dimensions 1.8" W x 3.0" H x 5.0" D
(4.57 cm x 7.62 cm x 12.7 cm)
Weight 6.3 oz
(179 g)
Operating Temperature 0 to +55 ° C (32 to 131 ° F)
Storage Temperature –40 to +85 ° C (–40 to 185 ° F)
Relative Humidity (Operating) 5 to 80% non-condensing
Relative Humidity (Non-Operating) 5 to 95% non-condensing
Shock (Operating) 30g peak acceleration, 11(+/–1)ms pulse width
Shock (Non-Operating) 50g peak acceleration, 11(+/–1)ms pulse width
Vibration (Operating) 2.5g at 5Hz – 2KHz
Vibration (Non-Operating) 5g at 5Hz – 2KHz
Power Consumption 130mA at 12V supplied through SCANport, and
60mA at 24V supplied through DeviceNet
ESD Susceptibility (IEC 1000-4-2) 4KV contact, 8KV open air
Regulatory Agencies UL 508 and CUL
European Union EMC and Low Voltage Directives
DIN Rail Mounting Standard 1.38 x 0.30 in. (35 x 7.5 mm)