beautypg.com

Rockwell Automation 1395 Multi-Comm Hardware/Software User Manual

Page 139

background image

Table of Contents

8–44

Parameter 459 – [A>ChB DH Out 1]
Parameter 359 – [B>ChB DH Out 1]

Use: Channel B DH+ output word #1
Parameter Type: Fast Sink
Program Terminal Units: None
Minimum Value:
Maximum Value:
Default Value:
None

Description: This parameter is a fast sink that provides data to other
devices on the network through the DH+ message instruction. The node
address is detemined by the DIP switch settings for channel B. The data
to be attached is determined by the configuration link made to this
parameter.

Parameter 460 – [A>ChB DH Out 2]
Parameter 360 – [B>ChB DH Out 2]

Use: Channel B DH+ output word #2
Parameter Type: Fast Sink
Program Terminal Units: None
Minimum Value:
Maximum Value:
Default Value:
None

Description: This parameter is a fast sink that provides data to other
devices on the network through the DH+ message instruction. The node
address is determined by the DIP switch settings for channel B. The data
to be attached is determined by the configuration link made to this
parameter.

Parameter 461 – [A>ChB DH Out 3]
Parameter 361 – [B>ChB DH Out 3]

Use: Channel B DH+ output word #3
Parameter Type: Fast Sink
Program Terminal Units: None
Minimum Value:
Maximum Value:
Default Value:
None
Description: This parameter is a fast sink that provides data to other
devices on the network through the DH+ message instruction. The node
address is determined by the DIP switch settings for channel B. The data
to be attached is determined by the configuration link made to this
parameter.