Rockwell Automation 1395 Multi-Comm Hardware/Software - Manual (Page 133)

Table of Contents
8–38
Parameter 404 – [A>ChA DH In 1]
Parameter 304 – [B>ChA DH In 1]
Use: Channel A DH+ Input word #1
Parameter Type: Fast Source
Program Terminal Units: None
Minimum Value:
Maximum Value:
Default Value: None
Description: This parameter is a fast source that contains data received as
part of a DH+ message instruction. The value can be used by the MCA
board directly or by other Drive functions through a configuration link.
Parameter 405 – [A>ChA DH In 2]
Parameter 305 – [B>ChA DH In 2]
Use: Channel A DH+ Input word #2
Parameter Type: Fast Source
Program Terminal Units: None
Minimum Value:
Maximum Value:
Default Value: None
Description: This parameter is a fast source that contains data received
as part of a DH+ message instruction. The value can be used by the MCA
board directly or by other Drive functions through a configuration link.
Parameter 406 – [A>ChA DH In 3]
Parameter 306 – [B>ChA DH In 3]
Use: Channel A DH+ Input word #3
Parameter Type: Fast Source
Program Terminal Units: None Minimum Value:
Maximum Value:
Default Value: None
Description: This parameter is a fast source that contains data received as
part of a DH+ message instruction. The value can be used by the MCA
board directly or by other Drive functions through a configuration link.
Parameter 407 – [A>ChB DH TP In 1]
Parameter 307 – [B>ChB DH TP In 1]
Use: Channel B DH+ Token Pass with data Input word #1
Parameter Type: Fast Source
Program Terminal Units: None
Minimum Value:
Maximum Value:
Default Value: None
Description: This parameter is a fast source that contains data from the
global data passed with the network token. The specific node address and
word are defined by the DH Rd Nde1 and DH Rd Wrd1 parameters. The
value can be used by the MCA board directly or by other Drive functions
through a configuration link.