Rockwell Automation 1395 Multi-Comm Hardware/Software - Manual (Page 120)

Chapter 8
Reference
8–25
Parameter 405 – [A>ChA RIO In 6]
Parameter 305 – [B>ChA RIO In 6]
Use: Channel A RIO Input word #6
Parameter Type: Fast Source
Program Terminal Units: None
Minimum Value:
Maximum Value:
Default Value: None
Description: This parameter is a fast source that contains the sixth word
or group of data from the PLC controller output image table. The data is
transferred to the Drive by the RIO scanner every rack scan. The value
can be used by the MCA board directly or by other Drive functions
through a configuration link. This parameter is only available on channels
that are setup as full racks.
Parameter 406 – [A>ChA RIO In 7]
Parameter 306 – [B>ChA RIO In 7]
Use: Channel A RIO Input word #7
Parameter Type: Fast Source
Program Terminal Units: None
Minimum Value:
Maximum Value:
Default Value: None
Description: This parameter is a fast source that contains the seventh
word or group of data from the PLC controller output image table. The
data is transferred to the Drive by the RIO scanner every rack scan. The
value can be used by the MCA board directly or by other Drive functions
through a configuration link. This parameter is only available on channels
that are setup as full racks.
Parameter 407 – [A>ChB RIO In 1]
Parameter 307 – [B>ChB RIO In 1]
Use: Channel B RIO Input word #1
Parameter Type: Fast Source
Program Terminal Units: None
Minimum Value:
Maximum Value:
Default Value: None
Description: This parameter is a fast source that contains the first word
or group of data from the PLC controller output image table. The data is
transferred to the Drive by the RIO scanner every rack scan. The value
can be used by the MCA board directly or by other Drive functions
through a configuration link. This parameter is displayed for 1/2, 3/4 and
full rack configuration.