Rockwell Automation 1395 Multi-Comm Hardware/Software - Manual (Page 125)

Chapter 8
Reference
8–30
Parameter 456 – [A>ChA RIO Out 7]
Parameter 356 – [B>ChA RIO Out 7]
Use: Channel A RIO Output word #7
Parameter Type: Fast Sink
Program Terminal Units: None
Minimum Value:
Maximum Value:
Default Value: None
Description: This parameter is a fast sink that provides the seventh word
or group of data to the PLC controller input image table. The data is
transferred to the PLC Controller by the RIO scanner every rack scan.
The value can be provided by the MCA board directly or by other Drive
functions through a configuration link. This parameter is only available
on channels that are setup as full racks.
Parameter 457 – [A>ChB RIO Out 1]
Parameter 357 – [B>ChB RIO Out 1]
Use: Channel B RIO Output word #1
Parameter Type: Fast Sink
Program Terminal Units: None
Minimum Value:
Maximum Value:
Default Value: None
Description: This parameter is a fast sink that provides the first word or
group of data to the PLC controller input image table. The data is
transferred to the PLC Controller by the RIO scanner every rack scan.
The value can be provided by the MCA board directly or by other Drive
functions through a configuration link. This parameter is displayed for
1/2, 3/4 and full rack configuration.
Parameter 458 – [A>ChB RIO Out 2]
Parameter 358 – [B>ChB RIO Out 2]
Use: Channel B RIO Output word #2
Parameter Type: Fast Sink
Program Terminal Units: None
Minimum Value:
Maximum Value:
Default Value: None
Description: This parameter is a fast sink that provides the second word
or group of data to the PLC controller input image table. The data is
transferred to the PLC Controller by the RIO scanner every rack scan.
The value can be provided by the MCA board directly or by other Drive
functions through a configuration link. This parameter is displayed for
1/2, 3/4 and full rack configuration.