Rockwell Automation 1395 Multi-Comm Hardware/Software - Manual (Page 135)

Table of Contents
8–40
Parameter 411 – [A>ChB DH In 1]
Parameter 311 – [B>ChB DH In 1]
Use: Channel B DH+ Input word #1
Parameter Type: Fast Source
Program Terminal Units: None
Minimum Value:
Maximum Value:
Default Value: None
Description: This parameter is a fast source that contains data received
from other devices on the network as part of a DH+ message instruction.
The value can be used by the MCA board directly or by other Drive
functions through a configuration link.
Parameter 412 – [A>ChB DH In 2]
Parameter 312 – [B>ChB DH In 2]
Use: Channel B DH+ Input word #2
Parameter Type: Fast Source
Program Terminal Units: None
Minimum Value:
Maximum Value:
Default Value: None
Description: This parameter is a fast source that contains data received
from other devices on the network as part of a DH+ message instruction.
The value can be used by the MCA board directly or by other Drive
functions through a configuration link.
Parameter 413 – [A>ChB DH In 3]
Parameter 313 – [B>ChB DH In 3]
Use: Channel B DH+ Input word #3
Parameter Type: Fast Source
Program Terminal Units: None
Minimum Value:
Maximum Value:
Default Value: None
Description: This parameter is a fast source that contains data received
from other devices on the network as part of a DH+ message instruction.
The value can be used by the MCA board directly or by other Drive
functions through a configuration link.