Rockwell Automation 1395 Multi-Comm Hardware/Software - Manual (Page 107)

Chapter 8
Reference
8–12
Parameter 468 – [A>CA Indirect 5]
Parameter 368 – [B>CA Indirect 5]
Use: A fast sink parameter for use by the function blocks
Parameter Type: Fast Sink
Program Terminal Units: None
Minimum Value: –32767
Maximum Value: 32767
Default Value: None
Description: This parameter is a fast sink used by function blocks to
obtain information from Drive parameters whose source is outside of the
MCA board. This parameter can be linked to any Drive source parameter.
Parameter 469 – [A>CA Indirect 6]
Parameter 369 – [B>CA Indirect 6]
Use: A fast sink parameter for use by the function blocks
Parameter Type: Fast Sink
Program Terminal Units: None
Minimum Value: –32767
Maximum Value: 32767
Default Value: None
Description: This parameter is a fast sink used by function blocks to
obtain information from Drive parameters whose source is outside of the
MCA board. This parameter can be linked to any Drive source parameter.
Parameter 550 – [A>CA Constant 1]
Parameter 500 – [B>CA Constant 1]
Use: Stores a constant for use by function blocks
Parameter Type: Setup
Program Terminal Units: None
Minimum Value: –32767
Maximum Value: 32767
Default Value: 0
Description: This parameter can be used to store a constant value for use
by the function blocks.
Parameter 551 – [A>CA Constant 2]
Parameter 501 – [B>CA Constant 2]
Use: Stores a constant for use by function blocks
Parameter Type: Setup
Program Terminal Units: None
Minimum Value: –32767
Maximum Value: 32767
Default Value: 0
Description: This parameter can be used to store a constant value for use
by the function blocks.