Rockwell Automation 1395 Multi-Comm Hardware/Software - Manual (Page 126)

Chapter 8
Reference
8–31
Parameter 459 – [A>ChB RIO Out 3]
Parameter 359 – [B>ChB RIO Out 3]
Use: Channel B RIO Output word #3
Parameter Type: Fast Sink
Program Terminal Units: None
Minimum Value:
Maximum Value:
Default Value: None
Description: This parameter is a fast sink that provides the third word or
group of data to the PLC controller input image table. The data is
transferred to the PLC Controller by the RIO scanner every rack scan.
The value can be provided by the MCA board directly or by other Drive
functions through a configuration link.
Parameter 460 – [A>ChB RIO Out 4]
Parameter 360 – [B>ChB RIO Out 4]
Use: Channel B RIO Output word #4
Parameter Type: Fast Sink
Program Terminal Units: None
Minimum Value:
Maximum Value:
Default Value: None
Description: This parameter is a fast sink that provides the fourth word
or group of data to the PLC controller input image table. The data is
transferred to the PLC Controller by the RIO scanner every rack scan.
The value can be provided by the MCA board directly or by other Drive
functions through a configuration link. This parameter is only available
on channels that are setup as full or 3/4 racks.
Parameter 461 – [A>ChB RIO Out 5]
Parameter 361 – [B>ChB RIO Out 5]
Use: Channel A RIO Output word #5
Parameter Type: Fast Sink
Program Terminal Units: None
Minimum Value:
Maximum Value:
Default Value: None
Description: This parameter is a fast sink that provides the fifth word or
group of data to the PLC controller input image table. The data is
transferred to the PLC Controller by the RIO scanner every rack scan.
The value can be provided by the MCA board directly or by other Drive
functions through a configuration link. This parameter is only available
on channels that are setup as full or 3\4 racks.