Rockwell Automation 1395 Multi-Comm Hardware/Software - Manual (Page 127)

Chapter 8
Reference
8–32
Parameter 462 – [A>ChB RIO Out 6]
Parameter 362 – [B>ChB RIO Out 6]
Use: Channel B RIO Output word #6
Parameter Type: Fast Sink
Program Terminal Units: None
Minimum Value:
Maximum Value:
Default Value: None
Description: This parameter is a fast sink that provides the sixth word or
group of data to the PLC controller input image table. The data is
transferred to the PLC Controller by the RIO scanner every rack scan.
The value can be provided by the MCA board directly or by other Drive
functions through a configuration link. This parameter is only available
on channels that are setup as full racks.
Parameter 463 – [A>ChB RIO Out 7]
Parameter 363 – [B>ChB RIO Out 7]
Use: Channel B RIO Output word #7
Parameter Type: Fast Sink
Program Terminal Units: None
Minimum Value:
Maximum Value:
Default Value: None
Description: This parameter is a fast sink that provides the seventh word
or group of data to the PLC controller input image table. The data is
transferred to the PLC Controller by the RIO scanner every rack scan.
The value can be provided by the MCA board directly or by other Drive
functions through a configuration link. This parameter is only available
on channels that are setup as full racks.
Parameter 575 – [A>ChB RIO Flt Sl]
Parameter 587 – [A>ChB RIO Flt Sl]
Parameter 525 – [B>ChA RIO Flt Sl]
Parameter 537 – [B>ChB RIO Flt Sl]
Use: Specifies MCA board reaction to PLC Controller RIO fault
conditions.
Parameter Type: Setup
Program Terminal Units: Bit selectable
Minimum Value: 0000 0000 0000 0000
Maximum Value: 0000 0000 0001 1011
Default Value: 0000 0000 0000 1011