Rockwell Automation 1395 Multi-Comm Hardware/Software - Manual (Page 132)

Table of Contents
8–37
Parameter 401 – [A>ChA DH TP In 2]
Parameter 301 – [B>ChA DH TP In 2]
Use: Channel A DH+ Token Pass with data Input word #2
Parameter Type: Fast Source
Program Terminal Units: None
Minimum Value:
Maximum Value:
Default Value: None
Description: This parameter is a fast source that contains data from the
global data passed with the network token. The specific node address and
word are defined by the DH Rd Nde2 and DH Rd Wrd2 parameters. The
value can be used by the MCA board directly or by other Drive functions
through a configuration link.
Parameter 402 – [A>ChA DH TP In 3]
Parameter 302 – [B>ChA DH TP In 3]
Use: Channel A DH+ Token Pass with data Input word #3
Parameter Type: Fast Source
Program Terminal Units: None
Minimum Value:
Maximum Value:
Default Value: None
Description: This parameter is a fast source that contains data from the
global data passed with the network token. The specific node address and
word are defined by the DH Rd Nde3 and DH Rd Wrd3 parameters. The
value can be used by the MCA board directly or by other Drive functions
through a configuration link.
Parameter 403 – [A>ChA DH TP In 4]
Parameter 303 – [B>ChA DH TP In 4]
Use: Channel A DH+ Token Pass with data Input word #4
Parameter Type: Fast Source
Program Terminal Units: None
Minimum Value: Maximum Value:
Default Value: None
Description: This parameter is a fast source that contains data from the
global data passed with the network token. The specific node address and
word are defined by the DH Rd Nde4 and DH Rd Wrd4 parameters. The
value can be used by the MCA board directly or by other Drive functions
through a configuration link.