Opticon PHL 7200 User Manual - Manual (Page 159)

OPTICON
User's manual
PHL-7000 series
6-16
Calling the dialer automatically on application start-up.
1. Starting from the main interface, select the Tools > Settings menu.
2. Click the Dialer link.
3. Check the On when loaded box in the window that shows up.
6.6 SMS
What is the 'Short Message Service' (SMS)?
The Short Message Service enables you to send messages in text format (160 characters
maximum) over a mobile phone network. This service requires a specific subscription.
Short messages are first sent to the SMS Center, which is part of the mobile phone network,
which then forward them to the recipients.
Received messages are stored in the memory. You cannot receive any more new messages
once this memory is full. For this reason, ensure you delete them regularly or configure the
application so it transfers them to your assistant.
Configuring the service center
1. Starting from the main interface, select Tools >
Settings and click the Network Operator link.
2. Select your country and mobile telephony
operator. The number of the default Service
Center is displayed. If it is not the number sent by
your network operator, you can change it
manually.
3. You can also use the Automatic detection button
for the application to interrogate your equipment
and configure these settings.
4. Enter the number for the answering machine
suggested by your network operator. It will be used
by the dialer.
5. Click OK to confirm.
Figure 6-10 Configuring the service
center