Opticon PHL 7200 User Manual - Manual (Page 158)

OPTICON
User's manual
PHL-7000 series
6-15
6.5 Internet connection
The Internet connection button enables connections to be made to Internet and to
start up applications associated with it (see connections).
Warning!
On most equipment, the fact of connecting to the Internet prevents the dialer from being
used.
Use the red button to disconnect the Internet access session.
6.5.1 Configuration
Accessing configuration
● Before configuring the application's dialer function, select the communications
equipment and the mobile telephony service provider using the Settings command on
the Tools menu. Next, access dialer configuration by clicking the Dialer command in
the General Setup window.
Configuring the answering machine
● You can add the number of your answering machine in the Operator settings selection
dialogue box (Tools > Settings menu). It will be dialed automatically if you leave the
stylus resting on the "1" key of the dialer.
Configuring a ringer
1. Starting from the main interface, select the Tools > Settings menu.
2. Click on the Dialer link. You can specify the various tunes to be played according to the
categories to which the callers belong in the window displayed.
3. Select the type of call to which a ringer is to be assigned in the first drop-down menu in
the Events field: Incoming call, or Receive an SMS.
4. If you have selected Incoming call, a second drop-down list will be displayed listing
the various categories specified in Contacts. Select the category to which you would
like to associate a tune.
5. Select the ringer in the Associated sound drop-down menu.
6. Use the Play and Stop buttons to test the selected ringer. Once you are satisfied with a
ringer, click OK to confirm.
7. Repeat these steps for each type of call to which you would like to assign a ringer.