Opticon OPL 9713 - Manual

OPL97139062-0-00
Quick Start Guide
• Read this quick start guide carefully before installing and/or using this product.
• Keep this quick start guide for future reference and store in a safe place.
• The OPL-9713 is a laser data collector with a GPS feature. The GPS feature makes it possible to add
location data and a time stamp to scanned barcode data.
Introduction
OPL-9713
Copyright © 2007, Opticon All rights reserved.
Overview
■ OPL-9713 Basic Specifications
Parameter Specifications
Physical
Features
Size (H) 129 × (W) 44 × (D) 26 mm Max
Weight 110g Max (excluding batteries)
Color Light gray
Control
Section
CPU 16-bit CPU
Clock Frequency 14.74MHz
External
Memory
FLASH ROM 512KB for BIOS and AP
(2MB flash memory is optionally available)
SRAM 512kB (for WORK and DATA)
Display
Section
LED Tri-color LED (Blue, Red and Green)
Buzzer Loudness : 75dBA or higher
Operation Section Keys 1 Key
Scanning
Section
Light Source Red laser diode
Wavelength / Output 650 ± 10nm / 1mW or less
Scan Rate 100 scans / sec
Supported
Symbologies
JAN/UPC/EAN (WPC), Codabar/NW-7, Code 39,
Code 93, Code 128, Industrial 2of5, Interleaved 2of5
Power Supply
Section
Main Battery Lithium-ion secondary battery （ 600mA ）
Backup Battery Lithium-ion secondary battery （ 3.4mA )
Operating Time 50 hours or longer
Data Retention Time 7 hours or longer (with GPS operations)
Clock Section Real Time Clock (RTC) Supports year, month, day, hour, minute. (Leap year supported.)
Comm.
Section IrDA
Specification : IrDA Ver1.2 Low Power
Baud rate : 2400bps to 115.2kbps
GPS
GPS Module : SIRF GSC3 Chip
Reception Frequency : 1575.42 MHz
Channels : 20 Max
Antenna : Patch antenna (20 mm x 20 mm)
Durability Operating Temp. 0 deg. C to 40 deg. C
Operating Humidity 20% to 85% (non-condensing)
Storage Temp. -20 deg. C to 60 deg. C
Storage Humidity 20% to 90% (non-condensing)
Charging Temp. 0 deg. C to 40 deg. C
Dust- and Drip-proof IP54
Shock
Dropped 3 times onto concrete from a
height of 150 cm with no defects found.
Notice
• This quick start guide may be revised or withdrawn at any time without prior notice.
• This quick start guide may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any
electronic or machine readable form without prior written consent of Opticon.
• Trademarks used are property of their respective owners.
• Under no circumstances shall Opticon be held responsible for any special, incidental, consequential or indirect dam-
ages, howsoever caused.
Caution and Warning
1. Laser Safety
• Do not stare into the laser beam.
2. Handling Instructions
【OPL-9713】
• Do not attempt to disassemble, modify or update this device.
• Operating the scanner while operating machinery or a vehicle can be distracting.
• Do not drop this product or put heavy items on this product.
• Do not insert foreign substances into the device.
• Do not use this product in the following areas:
- In areas exposed to direct sunlight for long periods of time.
- In dusty environments.
- Near water or other liquids, or in extremely high humidity.
- Near heat sources, such as radiators, heat registers, stoves, or other types of devices that produce heat.
- Near microwaves, medical devices, or low-power radio stations.
• When cleaning this product, rub gently with either a soft dry cloth or a damp cloth with mild detergent.
【Battery】
• Do not attempt to disassemble the battery.
• Do not expose the battery to heat sources including other devices that produce heat.
• Do not short the power leads on the battery. If the (+) and (-) terminals come in contact with metals (such as a necklace or
hairpin), a short-circuit will occur.
• Do not load the battery with the (+) and (-) terminals reversed.
• If you come into contact with material from a leaking battery, take the following actions:
- If the material gets into the eyes, do not rub. Immediately flush the eyes with clean water and seek medical attention.
- If the material comes into contact with the skin or clothes, immediately rinse the affected area with clean water. Consult
your physician if inflammation or soreness develops.
• Check local regulations for proper battery disposal.
(Please refer to the specification manual and instruction guide for details.)
■ Detailed View
① ② ③
⑤
⑦ ⑧
⑥
④
No. Item Function
1 Data Collector A laser barcode collector with a barcode scanning feature.
2 Lithium-ion Battery Pack Designated battery pack for the OPL-9713.
3 Strap
4 Quick Start Guide Provides product information and instruction guide.
Before Getting Started
■ What's in the Box
Confirm that you have the following items before getting started:
* The number of accessories may differ depending on the product specification.
Please contact the nearest dealer if accessories are damaged or missing.
The Netherlands Opticon Sensors Europe B.V. tel: +31 (0)23-5692700 / email: [email protected]
U.S.A.
Opticon Inc.
tel: 800-636-0090 / email: [email protected]
France Opticon S.A.S.
tel: +33 (0)1-41461260 / email: [email protected]
Germany Opticon Sensoren GmbH
tel: +49 (0)6074-91890-0 / email: [email protected]
Italy Opticon s.r.l.
tel: +39 (0)051-6321800 / email: [email protected]
Spain Opticon Sensores S.L.
tel: +34 (0)902-747469 / email: [email protected]
Contact
Sweden Opticon Sensors Nordic AB
tel: +46 (0)8-58548560 / email: [email protected]
United Kingdom Opticon Limited
tel: +44 (0)1582-635100 / email: [email protected]
Taiwan Opticon Far Eastern Ltd.
tel: +886 2-27597444 / email: [email protected]
China Opticon Sensors Europe B.V., Shanghai Representative Office
tel: +86 21-64480881 / email: [email protected]
Australia Opticon Sensors Pty. Ltd.
tel: +61 (0)2-43402666 / email: [email protected]
Brazil Opticon Sensors Europe B.V., Latin American Office
tel: +55 11-5081 2088 / email: [email protected]
Please contact OPTICON or your local dealer.
More product details, additional support, and configuration options (from the Universal Menu Book) are available at www.opticon.com.
No. Part Function
① Scan Key Starts a barcode scanning operation.
② GPS Antenna Receives information from a GPS satellite
and calculates a position solution.
③
Status LED
(Blue, Red and Green)
Alerts users to the status of the scanning
operation and data communication.
④ Optical Window The scan engine emits a laser beam through the
optical window while scanning a barcode.
⑤ Charging Terminals Electrical terminals for power distribution
and power management.
⑥ Battery Cover Protects the battery pack.
⑦ Buzzer Hole
⑧ Strap Hook
TTFF (Time To First Fix)
TTFF is the time required for a GPS receiver to acquire satellite
signals and navigation data, and calculate a position solution.
The TTFF for the OPL-9713 is as follows:
Memo
Hot Start 1 sec.
Warm Start 38 sec.
Cold Start 42 sec.
Designated Cradle (Optional )
* To connect the cradle to a host using a dedicated USB cable, you must first install a dedicated USB driver on the host.
* Please refer to the specification manual or the instruction guide for details of designated cradles.
CRD-9723
Communication &
Charging Cradle
Communication Method
(Cradle to Host)
Communicates with the host
via RS-232C or USB interface.
Size (H) 67.5 × (W) 71.5 × (D) 98.5 mm Max
Weight 85g Max (excluding AC adapter and cable)
Charging Time 3.5 hours RS-232C USB
Line-up of CRD-9723 series:
- single-bay cradle (1 x charging, 1 x communication)
- multi-bay cradle (5 x charging, 1 x communication)
- multi-bay cradle (5 x charging, 5 x communication)
Charging Cradle CRD-9722:
- single-bay cradle (1 x charging, no communication)