INFICON IQM-233 Thin Film Deposition Controller PCI-Express Card Codeposition Software Operating Manual - Manual (Page 67)

2 - 47
IP
N 07
4-
58
5-
P1
A
IQS-233 Operating Manual
2.3.3.6.2 Sensors Tab
Sensor assignments, Output-Sensor mapping, and Sensor/Output control method
are configured in the Sensors tab. See
Figure 2-38 .
Figure 2-38 System Setup window - Sensors tab
Name . . . . . . . . . . . . . . . . . . Sensor 1 to 6 (IQM-233 cards)
Sensor 1 to 8 (SQM-242 cards)
A new name for a Sensor can be entered in the
Name text box.
NOTE: Sensor 1 to Sensor 3 are displayed if one
IQM-233 card is installed. Sensor 1 to
Sensor 4 are displayed if one SQM-242 card
is installed.