INFICON IQM-233 Thin Film Deposition Controller PCI-Express Card Codeposition Software Operating Manual - Manual (Page 26)

2 - 6
IP
N 07
4-
58
5-
P1
A
IQS-233 Operating Manual
2.2.2 Installing IQS-233 Codeposition Software
NOTE: To update an existing installation of IQS-233 Codeposition software to a
newer version, see section 2.2.3 .
1 Click Windows Explorer or
File Explorer >> Computer >> (CD drive letter:) IQS-233.
2 Double-click IQS-233 SETUP.EXE.
3 The InstallShield Wizard will display.
4 Click Next.
5 Read the license agreement.
6 If it is acceptable, click I accept the terms in the license agreement.
7 Click Next.
8 Type the requested information into the User Name and Organization boxes.
9 Click Next.
10 Click Install to start the software installation.
11 When Install Wizard Completed is displayed, click Finish to close the
InstallShield Wizard window.
2.2.3 Updating IQS-233 Codeposition Software
To update an existing installation of IQS-233 Codeposition software to a newer
version:
1 Click Control Panel >> Programs.
2 If the IQS-233 Codeposition software was used with an IQM-233 card, select
IQM233 DLL x86 or IQM233 DLL x64.
If the IQS-233 Codeposition software was used with an SQM-242 card, select
SQM242 with IQM DLL x86 or SQM242 with IQM 233 DLL x64.
3 Click Uninstall to remove IQM233 DLL or SQM242 with IQM DLL.
4 In Programs, select IQS-233 Codeposition.
5 Click Uninstall to remove the previous version of IQS-233 Codeposition
software.
6 Install the latest version of IQM233 DLL or SQM242 with IQM DLL, as
appropriate. Refer to
section 2.2.1 on page 2-2 .
7 Install the latest version of IQS-233 Codeposition software. Refer to section
2.2.2 .