Declaration of conformity – INFICON IQM-233 Thin Film Deposition Controller PCI-Express Card Operating Manual User Manual
Page 5
DECLARATION
OF
CONFORMITY
This is to certify that this equipment, designed and manufactured by:
INFICON Inc.
Two Technology Place
East Syracuse, NY 13057
USA
meets the essential safety requirements of the European Union and is placed on the market
accordingly. It has been constructed in accordance with good engineering practice in safety
matters in force in the Community and does not endanger the safety of persons, domestic
animals or property when properly installed and maintained and used in applications for
which it was made.
Equipment Description:
IQM-233 Thin Film Deposition Controller
Applicable Directives:
2006/95/EC (LVD)
2004/108/EC (General EMC)
2002/95/EC (RoHS)
Applicable Standards:
Safety:
EN 61010-1:2010
Emissions:
IEC 61326-1:2.0 Edition 2012-07 (Radiated & Conducted Emissions)
(EMC – Measurement, Control & Laboratory Equipment)
CISPR 11/EN 55011 Edition 2009-12 Emission standard for industrial,
scientific, and medical (ISM) radio RF equipment
Immunity:
IEC 61326-1:2.0 Edition 2012-07 (Industrial EMC Environments)
Immunity per Table 2
(EMC – Measurement, Control & Laboratory Equipment)
RoHS:
Fully Compliant
CE Implementation Date:
November 2013
Authorized Representative:
Steve Schill
Thin Film Manager
INFICON
ANY QUESTIONS RELATIVE TO THIS DECLARATION OR TO THE SAFETY OF INFICON'S PRODUCTS SHOULD BE DIRECTED, IN
WRITING, TO THE AUTHORIZED REPRESENTATIVE AT THE ABOVE ADDRESS.