INFICON IQM-233 Thin Film Deposition Controller PCI-Express Card Operating Manual - Manual (Page 46)

3 - 6
PN
07
4-
58
4-
P1
A
IQM-233 Operating Manual
3.3 How To Use IQM-233 Standard Software
3.3.1 Starting the Software
3.3.1.1 Starting the Software in Windows XP or Windows 7
Click Start >> All Programs >> INFICON >> IQM-233 Standard.
 If this is the first time the software has been started, the IQM-233 Standard
window with Sensor Information pane is displayed. See
Figure 3-6 .
 If the software has previously been configured to allow source control by
selecting the Control Enabled check box in the Setup window, the IQM-233
Standard window with Sensor Information pane and Source Information
pane is displayed. See
Figure 3-7 .
3.3.1.2 Starting the Software in Windows 8
1 In the Start window, click the IQM-233 Standard icon.
2 If the icon cannot be found:
2a Click Search >> Apps.
2b Type IQM-233 in the Search text box.
2c Click the IQM-233 Standard icon.
 If this is the first time the software has been started, the IQM-233
Standard window with Sensor Information pane will display. See
Figure 3-6 .
 If the software has previously been configured to allow source control
by selecting the Control Enabled check box in the Setup window, the
IQM-233 Standard window with Sensor Information and Source
Information panes will display. See
Figure 3-7 .
Figure 3-6 IQM-233 Standard window - Sensor Information pane