INFICON IQM-233 Thin Film Deposition Controller PCI-Express Card Operating Manual - Manual (Page 45)

3 - 5
PN
07
4-
58
4-
P1
A
IQM-233 Operating Manual
3.2.2 IQM-233 Standard Software Installation
To update an existing installation of IQM-233 Standard software to a newer version,
see
section 3.2.3 .
1 Click Windows Explorer or File Explorer >> Computer >> (CD drive letter:)
INFICON Technical Documentation >> IQM-233 Card >> IQM-233
Software.
2 Double-click IQM-233 Standard vx.x.x.x Setup.exe.
3 The InstallShield Wizard will display.
4 Click Next.
5 Click I accept the terms in the license agreement.
6 Click Next.
7 Type information into the User Name and Organization boxes.
8 Click Next.
9 Click Install to start the software installation.
10 When Install Wizard Completed is displayed, click Finish to close the
InstallShield Wizard window.
3.2.3 IQM-233 Standard Software Update
To update an existing installation of IQM-233 Standard software to a newer version:
1 Click Control Panel >> Programs to display a list of installed programs.
2 If the IQM-233 Standard software was used with an IQM-233 card, select
IQM233 DLL x86 or IQM233 DLL x64 from the list.
If the IQM-233 Standard software was used with an SQM-242 card, select
SQM242 with IQM DLL x86 or SQM242 with IQM DLL x64 from the list.
3 Click Uninstall to remove the DLL.
4 Select IQM-233 Standard from the list.
5 Click Uninstall to remove the IQM-233 Standard software.
6 Install the latest version of DLL. Refer to section 3.2.1 .
7 Install the latest version of IQM-233 Standard software. Refer to section 3.2.2 .