INFICON IQM-233 Thin Film Deposition Controller PCI-Express Card Operating Manual - Manual (Page 15)

1 - 3
PN
07
4-
58
4-
P1
A
IQM-233 Operating Manual
1.1.4 Related Operating Manuals
PN 074-154 . . . . . . . . . . . . . . . . . . . Bakeable Crystal Sensor
PN 074-156 . . . . . . . . . . . . . . . . . . . Front Load Single and Dual Sensors
PN 074-157 . . . . . . . . . . . . . . . . . . . Sputtering Crystal Sensor
PN 074-609 . . . . . . . . . . . . . . . . . . . Cool Drawer Single and Dual Sensors
PN 074-585 . . . . . . . . . . . . . . . . . . . IQS-233 Codeposition Software
NOTE: Sensor operating manuals are available on the Thin Film Manuals CD
included with the IQM-233 card. Other related documentation can be
downloaded from
www.inficon.com .
1.2 Instrument Safety
1.2.1 Definition of Notes, Cautions and Warnings
When using this manual, please pay attention to the NOTES, CAUTIONS and
WARNINGS found throughout. For the purposes of this manual they are defined as
follows:
NOTE: Pertinent information that is useful in achieving maximum IQM-233 card
efficiency when followed.
CAUTION
Failure to heed these messages could result in damage
to the IQM-233 card or the loss of data.
WARNING
Failure to heed these messages could result in personal
injury.
WARNING - Risk Of Electric Shock
Dangerous voltages are present which could result in
personal injury.