Eppendorf epMotion 5075 - Manual (Page 89)

Operation
epMotion ® 5075
English (EN)
89
The epBlue worktable displays the required equipping of the epMotion worktable graphically.
3. Equip the epMotion worktable as displayed.
Details on equipping can be found in the following chapters.
9.2.2 Positioning tools on the worktable
9.2.2.1 Dispensing tools
4 dispensing tools can be positioned on the worktable.
When the application is started, epMotion checks if the required tools are available. You can choose the
order of the dispensing tools freely.
 Place the dispensing tool with the gold contact at the rear right of one of the T1 to T4 holders.
NOTICE! Damage to the gold contacts from handling.
The tool is damaged if the gold contacts on the tool become damaged or contaminated.
 Do not touch the gold contacts.
epMotion 5075
5075 v, vt
epMotion 5075
5075 t, vt, m max. 2× TM1, TM2
epMotion 5075
5075 l, v max. 3× TM1, TM2, TM3
epMotion 5075
5075 t, vt, m
TM 1 TM 2 TM 3
Waste
A2 T0 T1
T4 T2
T3 A3 A4 A5
B3 B4 B5 B2 B1 B0
VAC
epT.I.P.S. Adapter
epMotion 5075
5075 m PrepRack
ReservoirRack
epMotion 5075
5075 v, vt Vac Holder
epT.I.P.S.
Rack 3
epMotion 5075
5075 t, m
C1 C2 C3 C4 C5
TMX
Vac Lid
300mL/400mL
Liquid Waste Tub
50 50
MagSep