Eppendorf epMotion 5075 - Manual (Page 62)

Labware – vessels, plates and pipette tips
epMotion
® 5075
English (EN)
62
7.2 Plates
Abb. 7-2: Plates: left 96-well MTP, middle 24-well MTP, right 96-well DWP
Fig. 7-2: Plates: left 96-well MTP, middle 24-well MTP, right 96-well DWP
The following plates are available for the epMotion:
• DWP plates with 24, 96 or 384 wells
• MTP plates with 6, 24, 48, 96 or 384 wells
• Filter plates for use with the vacuum unit
• PCR plates with 96 or 384 wells
• Vessel plates with 96 individual vessels (tube plates)
Skirted plates can be placed directly at a worktable location. Plates can be placed on adapters.
Plates are transported with the gripper. Stacked plates will not be transported together.
Stacking plates
If they are manufactured by Eppendorf, the same type of plates can be stacked on the worktable. If you
would like to stack plates, use Eppendorf plates. Plates from other manufacturers may have deviating
dimensions, which will prevent them from being stacked.
7.2.1 Deepwell plates
Abb. 7-3: Deepwell plate with 96 wells
Fig. 7-3: Deepwell plate with 96 wells
A maximum of 2 Eppendorf DWP plates can be stacked at one location.
A thermoadapter is available for the Eppendorf 1.0 mL deepwell plate.