Eppendorf epMotion 5075 - Manual (Page 86)

Labware accessories
epMotion
® 5075
English (EN)
86
8.4.3.1 Using the LiquidWasteTub
1. Place the disposal bag on the edge of the waste container (see p. 84).
2. Place the LiquidWasteTub on the edge of the waste container so that the tab of the LiquidWasteTub
protrudes over the waste container clamping ring.
3. Place the lid on the LiquidWasteTub, if required.
4. Insert the waste container in the epMotion in such a way that the LiquidWasteTub is on the right-hand
side.
NOTICE! Risk of collisions due to loose LiquidWasteTub.
If the LiquidWasteTub is not properly seated in the waste container, the dispensing tool may
collide with the LiquidWasteTub when the tips are ejected.
 Always use the waste container with the clamping ring.