Eppendorf epMotion 5075 - Manual (Page 81)

Labware accessories
epMotion ® 5075
English (EN)
81
8.2.2 Vac holder vacuum holder
Abb. 8-14: Vac holder vacuum holder
Fig. 8-14: Vac holder vacuum holder
The vacuum holder is an adapter. The vacuum holder is used to store the vacuum frame on the worktable.
The vacuum holder is placed on location C4 of the worktable.
8.2.3 Thermoadapter
Abb. 8-15: Thermoadapter DWP 96
Fig. 8-15: Thermoadapter DWP 96
Thermoadapters are adapters for plates that can be tempered. A thermoadapter can be tempered on the
thermal module. Thermoadapters can be placed on the worktable with or without plates.
Thermoadapters will not be transported using the gripper. The gripper can remove a plate from the
thermoadapter or place it on the thermoadapter.
Thermoadapters are available for deepwell plates and PCR plates.