Eppendorf epMotion 5075 - Manual (Page 87)

Operation
epMotion ® 5075
English (EN)
87
9 Operation
9.1 First steps
This chapter describes how to operate the epMotion and how to execute applications.
 Information on how to create applications is available in the software operating manual.
9.1.1 Switching on the epMotion
Prerequisites
• The epMotion has been installed and commissioned by skilled personnel authorized by Eppendorf.
1. Close the front hood.
2. Switch on the device at the mains power switch.
3. Switch on the MultiCon.
4. Start epBlue.
• The carrier travels to the home position.
• The epMotion is ready for operation.
9.1.2 Using the MultiCon
You can find a detailed description of the MultiCon in the software operating manual.
9.1.2.1 Touch-sensitive screen (touch panel)
 Touch the screen with your finger.
You can also wear thin rubber gloves when operating the MultiCon.
9.1.2.2 Mouse
You can either use a mouse only or use it in addition to the touch-sensitive MultiCon screen.
 Connect the USB mouse to one of the USB ports.
The mouse arrow will appear on the screen as soon as the MultiCon has recognized the mouse.
9.1.2.3 Keyboard
You can either use a keyboard only or use it in addition to the touch-sensitive MultiCon screen.
 Connect the USB keyboard to one of the USB ports.