Eppendorf epMotion 5075 - Manual (Page 76)

Labware accessories
epMotion
® 5075
English (EN)
76
8.1.7 Reservoir Rack
Abb. 8-8: Equipped Reservoir Rack
Fig. 8-8: Equipped Reservoir Rack
The Reservoir Rack (4) is used to hold reservoirs (1) and Reservoir Rack modules (2). The Reservoir Rack
columns are numbered (3).
The Reservoir Rack can hold a maximum of 7 reservoirs (1) or 7 different Reservoir Rack modules (2).
Reservoir Racks can be loaded in any order.
The ReservoirRack cannot be placed on the thermomixer.
8.1.7.1 Loading Reservoir Racks
The temperature control of the Reservoir Rack modules in the outer positions is not as good.
 Insert Reservoir Rack modules and reservoirs in the Reservoir Rack with the code facing the rear.
8.1.7.2 Positioning the Reservoir Rack on the worktable
 The Reservoir Rack cannot be placed at A locations or location B0.
 Place the Reservoir Rack on the worktable so the Reservoir Rack tabs are positioned between the
positioning pins for the location.
4
1 2
3